Control panel PU-5
Assy: 3765 (a.k.a 3520)
In Stock
Voltage: 12V / 24V

Technical parameters:

Control panel PU-5, assy.3765 (a.k.a 3520) 

This control panel is suitable with all PLANAR air heaters 12V and 24V.


“Power mode”
(If the external sensor is not connected)
  • Designed for quickest possible heating of the space;
  • The heater operates continuously at a set power.


** “Temperature mode” 
(If the external sensor
is connected) 
  • Designed to heat the space to the required temperature;
  • Heat output decreases as the difference between the desired temperature and the temperature in the space decreases.


* “Ventilation mode”
  • Designed for air circulation in the space.


 ** “Ventilation during 
heating” - function
(If the external sensor
is connected)
  • Designed to maintain the required temperature in the space;
  • After the required temperature is reached, the space heating is stopped and space air circulation is performed;
  • Controls the space temperature; if the temperature drops below the set point, the heater will start in Ventilation mode.




40 EUR
Qty: Add to cart

* Please note, that PLANAR air heaters with production date 16.11.2016 or older does not support Ventilation mode. You can check your air heaters PLANAR production date on the warranty card. 


** Please note, that all PLANAR air heaters need external temperature sensor (assy.1458), so that the "Power mode" and "Ventilation during heating” function would work.

* Please note, that PLANAR air heaters with production date 16.11.2016 or older does not support Ventilation mode. You can check your air heaters PLANAR production date on the warranty card. 


** Please note, that all PLANAR air heaters need external temperature sensor (assy.1458), so that the "Power mode" and "Ventilation during heating” function would work.